View Single Post
Old 05-09-2011, 03:29 PM   #3
beemerfan
Tech Master
 
beemerfan's Avatar
 
Join Date: Oct 2006
Posts: 1,602
Trader Rating: 34 (100%+)
Default

The options that can be changed are what is available on PSX's web site. I personally do not have the programmer talent to compile new firmware. I have reprogrammed my radio several times and have settled on these options as a default for my personal liking. But as long as PSX leave's his website in service, you can choose any of the available options listed there.

a. Correct bad EXPONENTIAL adjustment
b. Correct displayed END POINT values when switching models
c. Low Voltage alarm set to 8.4 volts
d. Trim range increased -99 to 99 with finer stepping (1.5us instead of 2.5us)
e. 40 second backlight (16 second default turns off too quickly)
f. Use CH2 EXPO setting for throttle and CH3 EXPO setting for brake
g. Change channel 3 from a toggle to a moment switch
h. Modify trim buttons so they must be pressed for each stepping (auto repeat function is too fast and difficult to use accurately) but leave the D/R feature on auto repeat for quick adjustments while driving.

NOTE:-------------------------------------

THIS POST IS RELATED TO USING THE FIRMWARE GENERATOR. WHILE IT IS STILL AVAILABLE, THE LATEST FIRMWARE RELEASE BY PSX MAKES IT OBSOLETE.

Last edited by beemerfan; 06-22-2011 at 12:28 PM. Reason: Update
beemerfan is offline   Reply With Quote