The bearing holder has as been said before a dot that should be pointing downwards in the manual.
If you adjust the belt with this bearing holder the dot on the bearing holder points on both sides forward or backwards.
On the right side it should be as djoefromreal said standing clockwise 35 minutes and when you turn the car around and look to the left side bearing holder on 25 minutes.
Looking then at the top rear of the car they are then both in the same position,pointing backwards.
Try it and you will see what he means.
regards Roy
Originally Posted by
Mandirigma
This could be your problem why you are experiencing wobble on your gear diffs...the right and left side should be equal (ie if you have the right side at 35mins the left side should also be 35 mins.)
the bearing holder is a cam (shaped like an egg) so both sides have to be at the same position on the bulkheads so that the gear diff turns smoothly and straight. Hope i understood what you were trying to say here and that this comment helps.