View Single Post
Old 04-12-2011, 10:31 PM  
robk
Tech Champion
 
robk's Avatar
 
Join Date: Aug 2001
Location: Macho Business Donkey Wrestler
Posts: 7,576
Trader Rating: 22 (100%+)
Default

Quote:
Originally Posted by Team Lotus View Post
This may be off-topic; but from what I'm reading here, since the F10 uses a standard pan car style axle that will fit in a 1/10 pan car and use standard 1/10 pan car bearings; does that mean I can use the F10 hubs to mount the HPI touring car wheels on a 1/10 pan car like the CRC Gen X10? Will the front axle carriers and axles also fit? My goal is to be able to mount the Vintage Series touring car wheels and tires on my pan car.
The rear end should work out fine, the front may be harder due to the CRC front end design. You might have to use an Associated front end to fit the parts.
__________________
A mutually re-enforcing cascade of failure

"Failior [sic] crowns enterprise." Robert Goddard

I-Lap Scoring Systems http://www.rclapcounter.com/
robk is offline   Reply With Quote