Originally Posted by
tellan
I have mine fitted in to a 1/12th pan car but there is a very big difference.
using 4.2 settings were 0,4,5,0 and rollout of 48mm car was fast but very aggressive and motor was hot 88c
loaded 4.4 and settings changed dramatically 0,5,11,0 and rollout of 41.5 car was smoother and punchier and motor temps under 60c.
changing the punch setting to 4 and car was even smoother to drive but just felt it wasnt so fast. HTH.
Hi Tellan. I ran my 13.5 car again last night. My settings were 1,5,4,0. I was happy with the straight line speed and the acceleration. My rollout was 2.75 inches. Motor temp was 135 deg F. I was afraid to move to the higher boost profiles because I didn't think the track could handle it. I think these setting have a lot of potential.