Originally Posted by
TryHard
ok, how about this... the esc knows the rpm in real time, that's not in doubt.
But your asking for a log, which means the data has to be stored somewhere... if you want useful data (I still don't see the use of a max rpm log, as the boost/turbo should have long kicked in by then!), you need to log a whole run... which is going to be a lot of data.
Having said that... ESC with built in MicroSD port anyone?
no, Max Rpm Data is not as much as RPM Log space required...
anyway if you know some ESC are using the last minutes Log, will also
saved more space,
but what we need is to do setting's right...
So, Max Rpm @which timing presented will be very much possible.
and again can't compared with dyno, because ESC Rpm Data is better
information, as on Every Corner, Climb, Temp of track,etc will result,
different max rpm, which Dyno/Brushless analyzer will failed.
So obviously ESC rpm Log/Data is the best way we can get.
and about rpm when doing the boost/turbo, the way they work's,
you may need to read carefully my previous post, the steps to do it.
it is as simple as common setting's, safer, easier, and better performance to get.
better knows than Guessing.