Originally Posted by
gwil21
Are there any plans to come out with a front wheel 12mm hex/hub adaptor combo for the SC10? I prefer not to spend my money with proline.
Not from us; but we are optimistic that it will become a standard part from AE
.
Paul/Jason -
Thanks again for exchanging out the tires I had for a new pair this past weekend at the PNB, great customer service. The Double D's F/R were simply dialed on the SCT...
NP....Thanks for the support!
will the new zero offset sc10, xxx sct 12mm hex rims fit the new losi ten scte? If so I am switching everything over to them
No; Losi's offset is different from their 2wd to the 4wd. We will be working on a wheel that does fit; stay tuned
.
I have a question about tire foam combinations.
I do know I run some soft foams on loose and really like them.
I think there's soft, med, and hard foams?
then you have different rubber compounds...
I run indoor tacky clay, and outdoor clay/loose (local mountain stuff).
any help would be awesome.
We have 2 inserts; soft open-cell and firm closed-cell foam. We also tend to run the soft inserts 90% of the time outdoor clay/loose surfaces. Indoor surfaces are normally smoother/high-bite and tend to favor the firmer inserts. SCT normally uses the closed-cell insert for durability.
Compounds:
Green - Super Soft (All weather med/lowbite conditions)
Blue - Soft (All weather med/high-bite conditions)
Orange - Med (Hot weather high-bite conditions)
White - Hard (Hot weather extreme high-bite conditions)
Gold - Soft (smooth wet dirt/clay conditions)