Matt W

Thanks Antoni,

Here is my current setup......

I run on a very grippy open carpet track and the car is very snatchy on the front end and very nearly grip rolls on corner entry after quick directional change......


2 degree ff and fr toe blocks
1mm under all toe blocks
4mm under all upper camber links
Front wheelbase, 2.75 front, 1mm rear
Rear wheelbase, 2 front, .75 rear
Rear hub, .75 front, 2 rear
4mm akerman
Front toe, 0
Rear toe, 3
Front camber- 1.5
Rear camber- 2
500 weight oil front
400 weight oil rear
1mm 3 hole pistons
Hpi Gold and silver springs
Front shock position, 1 on wishbone, 4 on tower
Rear shock position, 3 on wishbone 5 on tower
Front droop, 6
Rear droop, 5
1.4 front roll bar
1.2 rear roll bar
5mm ride height all round

I also glue the front tyre edge to help with grip roll......


Any thoughts?????