Originally Posted by
omegaf
ok mine is now waiting for servos and engine. I mounted the receiver (spektrum 3300 telemetry) and i noticed that the receiver hands about 1mm below the chassis. with the suspension fully compressed the receiver hits the ground. is there anything i can do to prevent this? I would also like to prevent the chassis from hitting the ground at full compression of the suspension. I figured that i can achieve this by adjusting the screws on the dampers but then that will also make the suspension stiffer. any ideas?
you must be running quite a larger receiver if it sticking out the bottom of chassis mate, i run futaba which are large compared the the like of ko and spektrum and mine has easily 3-4 mm clearance, all i can suggest is add shims or washers to raise the receiver mount up slightly on the radio tray
as for the chassis, if you still planning on not running on a track with the car your gona struggle not to mark the underside of your chassis if thats what your after mate