Originally Posted by
reptile
I did this all i did was streatch it a very little bit so it would not shrink back all the way to it's original size but still needed to be streatched to put back on the holder and it worked great.
Also what makes these radios feel much better is used a thick grease like silicone grease and coat the steering components all of them that rub on each other when you turn the wheel put a coat of the grease also on the steering wheel shaft where you screw the wheel on it's bone dry where it rides on the plastic do this also,,,,, and coat all the springs with a coat and all the throttle trigger components... with a thick tacky grease the radio then feels as smooth as a airtronics!
yup, after a couple tanks it starts to squeak a bit, bit of grease and its good to go.