Hello again
I received my parts which I ordered a week back, installed them on the car and im just waiting for the 46mm steel bones.
While rebuilding everything, i re-checked a few things, first off : I know people say you must have abit of play around the wishbones, hubs etc ... but i had a look around the whole chassis and in some place i get 0,3mm of play, and some others 0,6mm of play.
So the amount of play on my car is between 0,3 - 0,6 mm. Is this too much ?
Should i try to minimise it ? Btw, if I have 0,3mm on the left side, i have 0,3mm on the right side too, this aplys to everywhere on the chassis ( wishbone, hubs ...)
Thank you