to get my box upgraded, I first had to downgrade it to 1.02. it seems like the later firmwares see to block certain updates. But reverting back to 1.02 always does the trick, so you will need a copy of the files with older firmware in.
Also I ran the new software today, I really like the power delivery, super punchy, super top end, seems to lack a little at about mid-range, but I think that might be to much timing to quickly.
I have a question regarding the Boost timing vs Turbo.
if then the max boost you can have is 30 degrees, because if you set to 38, the extra 8 degrees will be turbo.
firstly, do these 8 degrees of turbo adhere to the parameters that control normal turbo? eg, Full throttle delay and the new degress / 0.1s?
also then, what would you expect if you ran the following 3 configurations, because in theory they are the same?
1: Boost timing: 30, Turbo 8
2: Boost timing: 38, Turbo 0
3: Boost timing: 34, Turbo 4
And how the Turbo compensates for the boost if its set below 30:
2: Boost timing: 20, Turbo 18
2: Boost timing: 20, Turbo 10
Thanks
