Originally Posted by
Alex C
Jimmy,
Thank You kindly for the reply, although I should probrably clarify the request for information.
I typicaly use CRC Tires on my 1/12 Scale which places my overall wheel width to 172mm without any shims, I am mearly trying use these different offset Hubs to achieve a range of hopefully (168 - 172mm).
Now it is my understanding the wheel pattern or in better words the Rear Tire Bolt pattern from either wheel Mfr. (CRC, Jaco, Yokomo, Parma) are all the same except for the offset of wheel depth.
Kind Regards!!!
Alex
The Yokomo hubs will make the car even wider.
The only solution to try and narrow the car would be to machine a little off the bearing surface by the diff ring and do the same on the clamp hub. I hope that makes sense.