this Q has been asked at 2 thread, but no response... hope here i will get the answer... i am user of ezrun 5.5t n xerun 2.1 120A...
for the esc with dynamic timing (without supercharge/turbo timing)... let say the motor rpm limit is about at 8000rpm on load... and max esc timing is 20deg (motor timing is 0deg) ...
1. is that mean at max rpm/8000rpm will be at max timing/20deg (same with max speed i guess)...?
2. if the throttle at 40%, is the timing introduced to the motor will be at 8deg...? (40% of 20deg)
3. same with no2 Q, if throttle trigger hard from 0% - 100%... is max timing will be introduced at low rpm too...?
4. max speed is max rpm... is the max speed is about limit of current (max Amp) which apply to motor from esc, or it is caused by max timing...?