View Single Post
Old 11-10-2010, 08:34 AM   #2
Big Vic
Tech Adept
 
Join Date: Sep 2010
Location: Tacoma, Wa
Posts: 105
Default

Turn on transmitter, hold throttle to full, turn on car. You'll hear 6 beeps. Throttle to neutral, 4 beeps, throttle to reverse, 4 beeps. Wait 5-10 seconds and the series of setups will start. First 1beep -1beep, then 1beep-2beep, then 2-1, then 2-2, and so on. When you hear the one that you want pull and release the trigger. You'll hear 4 beeps (I think) and that setting will be programmed in.
Sound's like you want
1-2 for lipo
2-1 for 0 drag brake
3-4 for max throttle profile
4-2 for 1 second reverse delay.

Turn off car and then transmitter and you should be set to go.
Hope this helps
Vic
PM also sent
Big Vic is offline   Reply With Quote