R/C Tech Forums - View Single Post - Losi 8ight building and setup
View Single Post
Old 10-29-2010, 01:39 PM
  #8685  
tc5 man
Tech Prophet
 
tc5 man's Avatar
 
Join Date: Oct 2007
Location: levittown pa
Posts: 16,997
Default

Originally Posted by Integra
IMO the Stock 2.0 rear outter pins are Better then the M2C's for the fact you dont have to do any drilling and 3.5mm is more then enough....4mm is Overkill and imo having the small 3mm threaded shaft for the nuts is a weak point.


Go 2.0's and get a set of rear arms to go with them.

im using, the 2.0 rear outer pins and i had to use the 2.0 rear hubs and i can only use the (b) hole in the #4 hole on the tower inless i use the (a) hole with the upper #1 hole on the tower .

i like to use the (a) hole with the #4 on the tower i dont like the (b) on hole on the rear hub.

i have no idea how using the (a) hole on the rear hub with the upper #1 hole on the tower would work on my track.
tc5 man is offline