Originally Posted by
Quante
Easiest is doing this by PDF. You'll see I dont have the droop like they put it on the sheet. Its kinda ridiculous as they have it, cause there is no way for you to measure that value easily.
Its far easier and pretty accurate to measure with a digital caliper the distance between the screw head and the arm.
I see u took off the std side shock any chance you can up load a photo would like to see that mod
There is some info which missing and.is a big factor in my Testing
Skid angle ( kinda creates anti dive also shock length )
A massive change is adding shims to king pin 1mm at the top of the steering knuckle
What front springs you got??
Try adding a ae gold spring on the front shock running #30 shock weight
Another setup which I like the feel of black side springs and.harder center spring this does work well at the tracks I race give it a go
I measure the droop same as a.tc, take the wheels off and put the chassis flat use ride height setup tool under the bottom of the nut used to hold the king pin together