Originally Posted by
begrie
There a problem to my esc.. Using 528MOD and 518Stock with tekin redline 4.5T and orca 2s 5500mah 50C batt. All setting set to lower, when started the car was booom fast but after a second the car becoming too slow. Already change sensored cable but it still happens. Already double flash the SW on esc and 2 in 1 program box. Calibrate the remote. Either work, its still happens.
Someone,Please help me figure it out please.
Dont mix and match 518 is for motors 10.5t and up and the 528mod is for lower turn motors .The 528mod has lower boost settings in its algorithm to compensate for the lower turn motors as they are fast already .4.5T motor does not need boost full stop .
What your doing is trying to place a huge boost which the 518 has on a 5000hp motor example was like a full scale car it cannot be done without creating huge amounts of heat and damage.
second of all the tekin motors have huge kv rating for there winds .
Follow instructions and you will not have problems but trying to create something that you might not be experienced in will cause you major problems.