Originally posted by rc-zombies
Pretty much build per instructions... the shocks are self bleeding so majority of the time all the shock will feel the same. After you build do the rebound test...2 at a time...compress the shocks without any springs...and they should fully extend approx the same time....
50wt oil...if our running outdoors on asphalt you may want to drop it down to 40F / 30R depending on your track...
What would I look for if the shocks do not fully exend at the same time? My shocks seem to be full of oil with no bubbles.
Also, do any other manufacurers spring work on the Pro4? For example, Associated makes a set that has 6-7 different spring rates. Will these springs work on the Pro4?