R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 09-16-2010, 11:04 AM
  #5602  
tc3 racer sc
Tech Fanatic
 
tc3 racer sc's Avatar
 
Join Date: Jul 2003
Location: lancaster sc near charlotte nc
Posts: 921
Default

Originally Posted by Solara
528 should be the one to use.....

Between 13.5 and 17.5...gearing (final drive) is what I usually adjust, not much about the ESC setting EXCEPT item #4 DRRS. (8 for less aggressive, 9 for more aggressive). Outdoor (hint, less traction the carpet), I use #8, Indoor carpet (more traction and tighter), I use #9.

13.5 gearing....8.0 final drive for me, 17.5 gearing....7.5 final drive (INDOOR carpet with around 80 foot straight). Our drivers @ IIC SS 17.5 A-Main/B-Main was using 7.4 and 7.71....

13.5 gearing....6.8~7 final drive for me, 17.5 gearing....6.0~6.4 final drive (Outdoor asphault with around 120 foot straight).

We have used 5.2~5.5 12.3mm silver rotor on V3 17.5 motor on a 275 foot 1/8th track before..but that is some rare hugh track for electric TC setup.

All of the above setup were tested by Speed Passion V3 13.5 and 17.5 with standard rotor.
thxs for the reply im just in the middle of comparing i will tke what u hve here and apply thxs post ur esc setup thxs reggie
tc3 racer sc is offline