R/C Tech Forums - View Single Post - Yokomo R12
Thread: Yokomo R12
View Single Post
Old 09-13-2010, 12:55 AM
  #228  
landau
Tech Apprentice
 
landau's Avatar
 
Join Date: Jun 2005
Location: Tx/Tokyo
Posts: 68
Default

>Aron0

this is yokomo 12th driver Masayuki Murai (second place last year JMRCA nationals)

August 28th
Indoor paved track (temperature 35C humidity 47%)


Front

Camber angle 3 degree
Caster angle 3.2 degree
Toe angle -1 degree
Skid angle (F-down R-middle)

Suspension Brock optional 0.5mm including kit (standard 0mm)
Spacer under sus brock 1.0mm

Shock oil yokomo #600
Front spring standard (side by side)

Ride height 4.0mm



Center

Shock length 65mm
Spring yokomo black (optional soft)
Shock oil #400
Shock position (F-middle R-standard)

Roll spring black (optional soft)
Roll spring position (inside, this is not standard)
Roll shock oil yokomo #300


Rear

Rear tread width 168mm
Ride height 4.0mm
Ride height spacer 1.25mm down


Tire F yokomo L-rubber medium 43.5mm(additive 2/3, 10minutes)
Tire R yokomo L-rubber medium hard 44mm(additive full, 10 minutes)
Wheel R & F standard


Electric

Motor nosram 4.5T (timing insert : -10)
Spur/pinion kimbrough 88T / yokomo 22T
ESC nosuram V2 (setting 0-3-5-2)
Servo JR 3650
Body zytec or AMR (posting position Font-hole:1 Rear-hole:3)
Transmitter KO herios


these pic are last 11th September






Last edited by landau; 09-14-2010 at 05:18 AM.
landau is offline