Originally Posted by
irgo
This is another mistake on jimmy stegen calculator
that need be fixed,
as the supercharge timing 0 or off the END RPM should remain the same.
hes calculator mistake is it's
still calculate it's end RPM multiply related to sc punch.
so those are off Speed Passion Procedure.
No, Irgo the SC Punch is a BADLY NAMED menu item, should be called Timing Curve / Ramp or something, it is in effect from the moment the ESC hits the DMTS Start point, Then the timing comes in at whatever amount you set the Curve at if it is 550/Degree then the total timing is added at the rate. Once full throttle has been held for the delay time AND the DMTS has reached its set level THEN the addition gob of timing comes in AT THE SAME AS BEFORE. The timing is dynamic but in a LINEAR curve.