Originally Posted by
NitroFreakManHo
I forgot to add, when adjusting droop, make small changes ( 1mm ) . To measure, elevate your chassis, so that the a-arms and wheels hang freely and measure the length of your shocks, from the centre of the shock cap, to the bottom screw in the shock riser, they should be even left-to-right.
How do I adjust the droop. I have the RS version of the RC8 so I'm not sure if I would do it the same way as the RC8B. This is my first anything as far as RC goes, so I really don't know much, if anything.