Originally Posted by
coupe
Hey Nico,
i guess they could fit, it is a 10mm outside diameter, the inside is the same diameter like xray, the only thing i am not sure is if you have enough space for the clamping ring at the inside of the hub !!!
But i think the wheelaxles are only something about 18 or 19 euros the pair, so buy some and try.
Alex
At the moment I'm using the Capricorn wheel axles on my NT1 and the clamping ring has all the space to stay in. They are very similar to the Velox' ones in the design.
The steering block of the NT1 is 12 mm large (4mm for each ball bearing and 4mm of space between them).
Capricorn's wheel axles have a 13.5 distance to allow to set the offset of the car. It means that there are 1,5mm to fill with some shims.
http://www.capricornrc.com/os_capric...roducts_id=841
Can you please take some measure on you Velox?
Thank you Alex
