davidpai

iTrader: (1)

While the plywood was down from the walls it gave me the opportunity to install outside outlets in the rear of the trailer.





I installed a piece of plywood around the outlet box using liquid nail giving the outlet box a little more strength.



Removed the plywood from the other side and started on installing the outlet.





Before I chose the front of the trailer for the entertainment area I originally designed it to be on the driver's side wall of the trailer. Using a stair board that was a true 1" thick, I installed it in between two wall studs. This will allow a TV mount to be put in and give the wall plenty of strength, allowing me to drive down the road not worrying if every pot hole will rip the TV right off the wall.