ESC switch question and Hobbywing Ezrun troubleshooting
I have an Hobbywing Ezrun 80a 1/8 that needs the switch flicked at the base or switched back and forth quickly to turn on. After it is on, it will cut out after a big landing. Can I replace this switch with a Losi or Novak esc replacement switch? They both have on/off and a set button but not sure on compatibility.
I also have another Ezrun that just makes the motor twitch a little but no full revolution of the pinion. At first I thought I cooked the motor after a 15 minute main it was at 190F. I have since added a fan for my stock Fusion motors. I have tried two motors and same response. Any help would be greatly appreciated.