Ran this last night with the recommended settings for the 13.5T motor (running the XeRun 13.5T).
#9 8
#12 7
#13 6000rpm
#14 0.4sec
#15 -1
Measured 75c motor temp after 5 mins of driving.
This seemed bloody hot to me so i tried a few different settings.
#9 6
#12 5
#13 9000rpm
#14 0.5sec
#15 -2
Noticeably slower but the motor ran a fair bit cooler at 52c.
Couple of questions please.
1/ What sort of motor temps your guys seeing?
2/ What sort of temps do you think is acceptable?
I want to have Mode 3 as stock just in case i get any problems on the track, could someone please confirm these are the stock settings?
#9 1 (0°)
#12 1 (off)
#13 9 (15000rpm)
#14 9 (0.8s)
#15 7 (1000)
Lastly could some one please advise which way to go to run the motor hotter or cooler.
e.g.
#9 1 cooler - 9 hotter
#12 1 cooler - 9 hotter
#13 9 hotter - 1 cooler
#14 9 hotter - 1 cooler
#15 9 hotter - 1 cooler
*Edit
I'm running a 6.97 final gear ratio
Cheers
Mark