R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 05-03-2010, 06:34 PM
  #4044  
mr crum
Tech Master
iTrader: (5)
 
mr crum's Avatar
 
Join Date: May 2008
Location: tampa florida 813
Posts: 1,591
Trader Rating: 5 (100%+)
Default

Originally Posted by lastsun
hi, just need some help. i am running the SP GT2.0 PRO on a 12th scale with 1S 3.7v Lipo and a 6.6v LiFe receiver pack.

-i have problem using the LCD program box with 1S Lipo, i need connect to a 2S Lipo. is it normal?

-do i have to set the voltage cut-off to none before i can bind the esc and transmmiter?

-do i use all the 3 wires(black, red, white) that connect between the ESC and receiver?

-which esc firmware is best suit for 12th scale 4.0T motor
yes i always use 2s to program my 1s car i would set voltage cut off at 3.0 and yes use all 3 wires just remember not to turn the esc switch on with receiver pack hooked up it will cook instantly as far as software with a mod motor (4.0t) u should use 205g or 323a if u try to use supercharger software you will cook your motor
mr crum is offline