I will be running the MMP timing at 35 degs. standard timing on the x12 which I think is 2 dots?
with the timing this is my thoughts... let me know yours...
the x.12 motor has 3100 rpm per volt, multiply that by the nominal voltage of the lipo (7.4v) and the peak voltage 8.4v. 7.4x3100=22,940 RPM and 26,040.
so my thoughts if you add the 2 RPM values together, divide by 2= 24,490 RPM
so I know the average max RPM of the motor and would set the timing to come in at about 2/3 through the max RPM i.e 16,000 ish
what do you reckon... I would do the same calculation for 10.5/mod
also once the timing is set, I would then adjust the timing degrees and gearing and leave the timing start 16,000