Originally Posted by
bigmane42
u are seriously screwing up!! screw your high and low speed needles all the way in,then unscrew them counter clockwise to flush.prime your engine by removing your fuel tubing from the pipe, blow in that end watch for the fuel to hit the carburetor stop reconnect the fuel line to the pipe.put a fresh d battery in your ignitor pop it on and give about 3-5 quick pulls.your engine should start. but remember u have screwed up your idle needle so now u might hve to take it to your hobbyshop
as i said before, im 400 miles from the nearest hobbyshop