Hi guys I have a setup question to everybody. It seems like I have the opposite problem like most of you guys. My car seems to push/understeer a lot. We are driving on a carpet indoor track and it seems like I can't keep up with all the others in the infield. To get arround the corners I have to drive slow and have to take the corners wide. It seems like I get not enough weight on the front tires.
Here is my setup:
F104 Ferrari F60
http://www.tamiyaclub.com/showroom_m...8023&sid=20068
- Type A foam tires
- soft gold M chassis spring
- 200 weight Tamiya Oil
- 3 whole shim in damper
- teflon friction plates with no grease
- kit springs on the front
- 1 degree camber
- 0 degrees toe (neutral)
- jack the gripper for saucing ... half on the fronts/full on the rears
- kit T-bar
- rideheight in the fron 4mm 5.5 in the back
I don't know what the problem is but I need more corner speed to be competitive. Can it be that because of the soft setup in the rear not enough weight gets transferred to the front while breaking? The other problem is this track is bumpy as crazy and so the car should be soft in the rear otherwise you loose contact on the fast straight.
The car is also really twitchy for that I will try more Expo the next time like most of you guys recommended.
Anyone ideas about the problem?
Thanks
Steve