Originally posted by Evoracer
Hey folks, can somebody direct me to the page that lists the part numbers to build a ball diff for the front. I'm trying to search but not having much luck. Gonna try my luck in our State races and 1 ways aren't allowed.
Also, if anybody has a good setup for asphalt, technical track, CS-27 tires, 27t Reedy MVP .....I'd appreciate the help. Time to break in the never used Surikarn Evo.
OK...found this . Ball diff parts needed:
TA04 ball diff kit
Evo3 outdrives
f201 diff rings
Is this still the best way or is there a new kit that includes all??
Thanks
I think that is all you will ned for an Evo3 diff. Though, if i'm not mistaken, the TA04 diff comes with bushings instead of bearings so you might want to get those. But i'm not sure though. Here's my diff technical asphalt CS27 setup:
Front:
Camber: -1deg
Toe: 0deg
Droop: 2mm
Oil: 60wt
Spring: Yellow
Piston: 3-hole
Upper link spacer: 5mm
Upper shock mounting hole: outer-most
Stabilizer: none
Rear:
Camber: -1deg
Toe: 3deg in
Droop: 3mm
Oil: 50wt
Spring: Yellow
Piston: 3-hole
Upper link spacer: 2mm
Upper shock mounting hole: middle
Stabilizer: none