View Single Post
Old 03-08-2010, 03:34 PM   #2263
Serzoni
Tech Fanatic
R/C Tech Elite Subscriber
 
Join Date: Feb 2005
Location: Mobile, AL
Posts: 858
Trader Rating: 13 (100%+)
Default

Just got home from work, so here's the final setup I ended up trying on the car before I packed up and called it a day-

Front End
Springs-.020"
20k diff fluid on the kingpins
10 degrees reactive caster
3.25 degrees of static caster
-1.5 degrees of camber
0 degrees of toe
large ackerman spacer on servo mounts
no bumpsteer spacers
6mm ride height
162 mm width
Parma Pro 38 Purple @ 45mm diameter

Rear End
25wt center shock oil
Silver center spring
20wt side shock oil
green side springs
1.5 turns of preload once the springs touched the side links
center shock mount - top hole in front, and stock spacer under rear ballcup
2mm droop (over ride-height method)
6mm ride height
172mm width
Parma Pro 38 Magenta @ 47.25mm diameter

Electronics
Futaba 9650 servo
4-cell GTB (replacing with a Tekin RS this week)
Speedzone 5000mah 50c lipo
Battery forward
Novak SS 10.5
gearing - 35/88

Last edited by Serzoni; 03-08-2010 at 03:45 PM.
Serzoni is offline   Reply With Quote