here is something ... take a dryer sheet ( bunce ) and rub your hands with it as if your hands where realy greasy , then start to glue your tires.
most important is be sure your tire and rim will sit perfect before the glue
have all tires allready pre-mounted, then pick up the glue and a tire and lighly raise a lip of one side insert the clean glue tip into the bead between tire and rim and let your finger off the tire where you opened it ,
now with the bottle slightly raised for glue to be at the nozzle swiftly and evenly, with out over squeezing the bottle ROLL or twist the bottle and the tire so the tip of the glue bottle follows along the tire and slides along the rim filling it with glue as it goes anf the tire falls back into place itself after you make a full turn pull out nozzle. install a rubber band if your tires seem to be not seating right... you put too much glue!
then put that tire down and do the other side only when the glue is completly dry, next day if you can wait!