Seems to be alot of jpr03 talk and I had a couple of questions that I could not get an answer.
I am wondering if a 35plus21 p/s set with work with case and crank from r1 series engine? Anyone actually try this? Seems that best I can figure the maxpower engines share this format of 14mm crank r1 series and 9 port p/s set.
When I reviewed the part number for stock r03 and r01. They share the exact same crank as the novarossi 321p and r1 kangaroo engine.
The sleeve on the stock ro3 and ro1 are also similar part number.
So long and short of it is the r03 is modded 321p and r01 is a modded r1 best I can figure. Is this correct?
However when I look at r9/r7 I can not find similar nova crank or p/s set. Is it based of 35 plus?
I enjoyed the way r1 kangaroo runs at my local track for fuel economy but seems to be a little down on power to 35plus Cordoba. I am wondering if a hybrid motor of r1 case,crank and 35plus will fit the bill?
Thanks
Jamie