As I mentioned before I picked up a second hand TC5R and tore it back down to kit form. Now that Im in the process of putting it back together I have a question about some of the screw lengths. The arm mount screws show a 3x12mm BHCS but after digging through my cup-o-screws I cant find any that length....so I went back to the manual and noticed that even though the screw/nut/shim description shows a 3x10mm BHCS there isnt one used in any of the steps in the build. I seem to have plenty of the 3x10mm BHCS and was just wondering if the original owner jacked this all up or if its just a mistake in manual. BTW Im measuring the screws with a ruler and just measuring the actal thread length.