R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 02-20-2010, 06:38 PM
  #2561  
Cain
Tech Legend
iTrader: (294)
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 34,375
Trader Rating: 294 (100%+)
Default

ok guys, I am using the following:

- TQ Booster
- Speed Passion GT2.0 LPF
- Speed Passion V3.0 17.5 Motor
- Spektrum SR3500 Reciever
- Futaba S9602 servo
- SMC 25C 4000mah 1S Lipo
- Spektrum DX3S Radio
- AMBrc Transponder

The booster powers the electronics and everything fine. I am switching on only the booster when I attempt 1S operation. If I try it with the ESC on, I don't turn on the booster. Either way, it still stutters as described when using the 107 or 110 stock software. With the 323 software, no issues. You can feel a difference in the power on the motor with the 323 versus the 107.

I have gone through now 4 sensor wires, I have a total of about 7 of them in the apporipriate length, not included the really short ones that the new motors come with. Its not the sensor wires. I have tested the motors on the ESCs on 2S lipo, NO ISSUES now.
Cain is offline