this may be a stupid question:
when i remove my shocks off the 416 the suspsension arms hangs and stops because it hits the bottom chassis when the droop screw is removed.
when i reinstall the shocks the suspension arm floats 3-4mm above the chassis.
is this normal for the 416 or is my shock shaft too short?
thanks in advance.
Your shock length should be about 61mm. I don't know why you'd ever remove the droop screws, but there wont be enough length in the shock shafts to let the arms bottom out on the deck.
Originally Posted by
redbones
What's the part no. for the o-rings? They offer two different ones. (temp range)
I used mk-r01, the sky blue ones