R/C Tech Forums - View Single Post - What is the shim clearance on a LRP 28 on 30%
Thread: What is the shim clearance on a LRP 28 on 30%
View Single Post
Old 01-10-2010, 05:45 PM
  #3  
w_kirk_jr
Tech Adept
 
w_kirk_jr's Avatar
 
Join Date: Jan 2008
Location: hazard ky
Posts: 157
Default
to be safe an have good run times get a mic and the shims should total to 0.280mm u can go as low as 0.275 for more power but i would actully recomend 0.300 for beter run time and longer life
w_kirk_jr is offline  
Reply