R/C Tech Forums - View Single Post - Team Losi JRXS Type-R
View Single Post
Old 01-10-2010, 03:11 AM
  #11268  
jrxs-r
Tech Fanatic
iTrader: (11)
 
jrxs-r's Avatar
 
Join Date: May 2007
Location: Perth, Western Australia
Posts: 831
Trader Rating: 11 (100%+)
Default

Just finished rebuilding my 2x Type Rs after a total strip down. I machined the rear motor bulkheads to accept the new IP5000 40C/50C packs. Took about 0.75-1mm off the side and the top. On assembling the top deck and screwing it down onto the rear bulkheads, you will need to use a #4 washer to space the screw up so it wouldn't get in contact with the LiPo. Have a look see and you will know what I am talking about.
Attached Thumbnails Click image for larger version

Name:	_DSC0086.jpg
Views:	328
Size:	98.7 KB
ID:	539659   Click image for larger version

Name:	_DSC0088.jpg
Views:	253
Size:	93.5 KB
ID:	539660   Click image for larger version

Name:	_DSC0090.jpg
Views:	284
Size:	95.7 KB
ID:	539661   Click image for larger version

Name:	_DSC0101.jpg
Views:	276
Size:	76.3 KB
ID:	539662   Click image for larger version

Name:	_DSC0102.jpg
Views:	294
Size:	78.7 KB
ID:	539663  

jrxs-r is offline