Originally Posted by
tc5 man
i did the same thing with sanding down the center diff mount cover and strighten the carb to be stright it still looks like it barely rubbing but when i pull the slide carb in and out it feels fine is that ok i would think though if you have the thottle epa set where the carb is still showing not fully open u should be fine
No, that ISN'T fine. When you land a jump and the chassis flexes it's going to make contact and possibly damage the carb.
And if you can drive a C6 in a buggy with it properly tuned and use full throttle, you're probably a pretty good driver. Holy cow that's a lot of motor for a buggy.
I had one in my truggy (borrowed) and when it "came on the pipe" it would yank the front wheels off the ground. That's with it tuned FAT and a 6.5mm restrictor in it. That motor is just plain STUPID fast.