Originally Posted by
VRacing
1. I'm using the TQ brand sensor wire which is very flexible (won't add any tweak to the rear suspension). I have the 170mm wire which gives you a little slack, you may be able to get by with the 150mm depending on your mounting of the ESC.
2. Using the Fantom 5000mah 40c, no problems. Have put a small piece of lexan on the bottom with servo tape (in the chassis slots), to keep it from moving around. I think you'll have to do that with any battery as the DB12RR battery strap is a bit on the loose side.
Aaron
Thanks for the input, Will pick up a 170mm sensor wire as well. Appreciate it.