Originally Posted by
Rough_necked
I need help with a vta car setup. I run at msi racing in Detroit on carpet. I have a stock rubber chassis the only changes I have made are 45 oil in front and35 in rear shocks.
First of all with the stock springs the ride height is 5.5 and the rear is 6 without adding any preload to them.
Second I am not used to running a spool but it had a monster push to it.
I forgot that I am not running swaybars.
To try to make it turn in I layer the front shocks 2 holes and stood up the rears one. I also went to a 11 insert on the bell crank and pulled the silver spacer out of the toe setting in the rear.
Any help is appreciated
Chuck
Chuck, now I guess I know who bought that other Photon that was in the case! If you're going to be there this (or any) Wednesday night, seek me out (I usually sit in the back of the track, front row, back to the track), Dark Red Camaro with the Gold #13 on the side. I'll be happy you share my Photon VTA setup for the track with you. I'm not sure why you are pushing, my car has more front end grip than you can shake a stick at.