Originally Posted by
kodiakbear7070
yes and ive even adjusted the linkage lil at a time to get it right so it would not make any noise ive adjusted the arm so that the carb valve would be closed. still same result
with the throttle at neutral ......and everything turned on ....loosen the the 2 collars on the linkage going to the carb ....with your thumb push in on the linkage to make it push all the way to the throttle stop ...then while holding it in...tighten the outer most collar ...then with allen wrench in the set screw of the collar that puts pressure on the spring ...move it outward to compress the spring just a tiny bit ...then tighten it ....repeat that process until you reach a point where you are happy ....also do you run a hair band or return spring or carb-o"s that might help as well ....thats the way i do it ...you really shouldnt HAVE to use subtrim ....i just set up my losi 8 linkage and used no subtrim on the throttle linkage ...it is possible ...just takes a while ...lmk how that comes out
