View Single Post
Old 08-31-2009, 08:53 AM  
DOMIT
Tech Elite
 
DOMIT's Avatar
 
Join Date: Oct 2007
Location: Fort Worth, Texas, USA, North America, Earth, Solar System, Milky Way Galaxy, Universe
Posts: 4,034
Trader Rating: 1 (100%+)
Send a message via MSN to DOMIT Send a message via Yahoo to DOMIT
Default

Quote:
Originally Posted by wingracer View Post
Was the engine going to full throttle before you got to full throttle on the trigger? If so, it's just an end point problem. Make sure exp is zero or negative. If it's +20 or something like that, there is the problem.

Also, lean out the bottom on that bad boy, it can take it
Endpoint is correct and the exp = 0%

As for the Novarossi... it is already a little too lean on bottom. It was "singing" over jumps a bit if I was full throttle on runup, so the bottom is too lean. (If I was only 1/2-3/4 throttle it didn't sing...) Temp at the end of the main was 258... temp at the end of the last heat on Saturday was 274. A bit too warm for comfort, although I did have good smoke... top seems about right. The bottom needs to be fattened up a bit, but I was having trouble with it bogging and not wanting to idle if I did so. It only has maybe half a gallon on it now, and is still so tight I can't turn it over in the chassis when it is cold.
__________________
Brad "DOMIT" Smith - I'm not fast, but at least I wreck a lot.
Unsponsored, but I use/recommend: XRay XB9, Alpha A852, Dynamite 053, Airtronics M11, Hitec 5955TG & 7955TG, ABEC 35 clutch and chassis bearings, PTRCRacing shock and diff fluids, Ready Rollers ceramic engine bearings. ** Team Terribles Region 9 coordinator. ** JOIN TEAM TERRIBLES! All racers welcome! PM me for details.
DOMIT is offline   Reply With Quote