Originally Posted by
CSF0623
I tried Korey's set up which works pretty well for me on parking lot races as well as indoor asphalt.
parking lot/low-medium asphalt setup now (90 deg air temp).
Front:
Spring: HPI Pro 4 Pink
Oil: Losi 70wt, zero rebound, no foam
Piston: 2 hole 1.2mm (the stock one)
Shock Position: 2 on arm, 3 on tower
Camber Link Position: long, 2mm under inner pivot
Camber: 2 deg
Caster: 4 deg
Toe block: 2.5 deg (try a 2.... it'll give a little bit crisper turn in)
Shims under suspension and toe blocks: 1.0mm
Droop: 5.5mm off of a gauge
Toe: 0
Wheelbase: .7mm behind arm, 2mm in front
Ackerman: 3mm on center bell crank
Front drive: spool
Swaybar: silver (1.4mm with 2mm gap in the links)
Rear:
Spring: HPI pro 4 blue
Oil: Losi 70wt, zero rebound, no foam
Piston: 1.2mm 2 hole
Shock position: 4 on tower, 3 on arm
Camber link position: long on bulkhead (1mm under pivot) and short on rear hub (0mm under it).
Toe block: 3 deg
Rear Hub: 0 deg (stock)
Swaybar: copper (1.2mm) with 3mm gap in link
Shims under toe and suspension blocks: 1.5mm
wheelbase: 2mm in front of arm,
any guys got a good concrete track set up a good base to set up