Originally Posted by redbones

I've been running a slipper spool for 6mo. now, and it never came loose on me. I really should be maintaining it, but if it ain't broke, don't fix it.

I used the three extra holes in the inner part of the pulley. you will need to shave some materials off to get them into the hole, and make sure you shave the flat side so you still have a diff function(about 3.0-3.1mm)

Weight wise, it was surprisingly only about a couple grams heavier.


On a side note, do you guys use the softer TA05 IFS-R c-hubs for prefer the stock ones? The IFS-R ones have give, but gives so much that it tears the bottom screw out of the knuckle. And the c-hub won't go back to its original dimension, giving the knuckle huge play. Then again, it wouldn't have mattered if it was a crash that big...