R/C Tech Forums - View Single Post - Hot Bodies Cyclone
View Single Post
Old 07-28-2009, 11:52 PM
  #17056  
Korey Harbke
Tech Champion
iTrader: (13)
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,176
Trader Rating: 13 (100%+)
Default

Originally Posted by bigz
im using 3 deg toe blocks at the rear with -2 camber and up front 2.5 deg -1 camber and 0deg in the steering. 2mm shims all around. shock pos up front 3 and 4 at the back. ride height is at 5 and 4 droop front and rear. spool for the front. tires are sorex 36 with med hara insert,.

thanks.
I would take some droop out first maybe... That will help control weight transfer a bit. If you are measuring with a droop gauge, about 5mm rear and 5.5 mm front is usually pretty good. Also maybe try a little bit of arm sweep ip front (larger toe block). It usually smooths out steering initially for me, but digs in a lot more around the apex. Also could try messing with ackerman. Running 2-3 mm instead of 4 on the steering will help smooth steering inputs a bit too.

-Korey
Korey Harbke is offline