Originally Posted by
k_bojar
did you try a different servo and/or receiver??
remember, an Electric TC is mucho lighter than a truggy, so if you got a SUPER high speed/high torque servo, that might be causing some issue..
usually electric TC needs about .10ish speed and about 100oz toqrue
I'd try a different receiver, crystal (if you're still using them), and/or a servo and see what happens
Thanks, K Bojar, I should have stated that I am using 2.4 Spektrum. Have tried different modules and receivers. Servo is a new KO PROPO PDS-2413ICS digital servo.
Luic; I will reset the 'N' from 'F' and try, thanks.
Aaron