Originally Posted by
Foxxrocket
I have my shocks set to 4.3mm rear and 4.1mm front.
Thanks again Fox I just got a Hudy Ultra Fine Chassis Ride Height Gauge, Hudy Ultra Fine Chassis Droop Gauge (4.0-6.6mm), and Hudy Chassis Droop Gauge Support Blocks. Can's wait to get things a little more fine tuned.
Minus the ride height you just posted... are these the settings your still using?
Toe:
1.0 toe-out front
2.0 toe-in rear
Camber:
-1.5 front
-2.0 rear
Caster:
3° front
2° rear
Springs:
pistion #2, 40W, Blue front
pistion #2, 40W, Blue rear
Ride height:
4.5mm front
4.5mm rear
Droop:
4.5mm front
4.5mm rear
Sway-bars:
black front
black rear
Differentials:
Spool front
Ball Diff rear
Tires:
28R front
28R rear
Just a side note. I have my shocks laid down three holes in the front and one hole in the rear.