Originally Posted by
mfrosty
Take a pair of pliers and turn that "black stick" (this is your throttle linkage, the thing on the end is the ball cup) you want to grip it by the shaft of the ball cup. Turn it until it pops off.
You can remove and reuse your old flywheel/clutch assembly, you should get new clutch shoes and springs though.
I'm guessing that you don't have the manual so here are the links
Parts Explosion
Manual Part 1
Manual Part 2
Ok thanks for that, I was able to pop it off with the pliers. Although, the 4 screws are so extremely tight, that if I hold the sextant steady and try to rotate it with a massive pressure, the sextant bends a lot but the screw doesn't move anything! Any ideas?
EDIT: Sorry, didn'T see your latest post frostie. Gonna try the hairdryer and tell you how it turns out